Skip to content

Selection of Lambda Probe

To calibrate the lambda probe or lambda controller that we have connected to the system, we must obtain the calibration values ​​provided by the manufacturer in their manuals.

The Accudyno system has several models of Wideband controllers preloaded, so just selecting it from the list will be enough for most cases.

Procedure

Calibration is done in the OptionsSettings menu. Then go to the list of Signals in Calibration.

Find the signal that corresponds to Lambda. When you select it you will see the Calibrate... button.

Select the brand and model and click Finish, then OK.

Back to top